Descrizione

Ultra Small CCD Barcode Reader, Side Type
Model BL-185SO(7031)
Reading direction Side
Light source/Light receiving element LED/CCD image sensor
Reading distance 33 ±10 mm *1 (Using narrow bars of at least 0.19 mm in width)
Readable bar width 0.125 to 1.0 mm *2
Largest readable label width 80 mm *3 (Using narrow bars of at least 0.19 mm in width)
PCS 0.45 or more (Refl ectance of white part: 75% or more)
Scanning rate 500 scans/sec
Supported codes CODE39, ITF, Industrial 2-of-5, COOP 2-of-5, Codabar, CODE128, EAN/UPC (A·E)
Number of readable digits 32 digits
Trigger input Non-voltage input (contact or solid-state), TTL input is also possible.
Serial interface Applied standard RS-232C
Synchronisation Start-Stop
Transmission code ASCII
Baud rate 600/1200/2400/4800/9600/19200/31250/38400 bps
Data length 7/8 bits
Parity check None/Even/Odd
Stop bit length 1 bit/2 bits
OK/NG output Output form NPN
Rated load 24 VDC, 100 mA
Leakage current (at OFF) 0.1 mA max.
Residual voltage (at ON) 0.5 V max.
Rating Power voltage 5 VDC ±5 %*4
Current consumption 300 mA
Environmental resistance Ambient light Sunlight/Incandescent lamp: 10,000 lux, Fluorescent lamp: 3,000 lux.
Operating environment No dust or corrosive gas present
Ambient temperature 0 to +40 °C
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Weight Approx. 180 g
*1 33 ±5 mm when the narrowest bar is less than 0.19 mm. *2 Readable bar width indicates the range of the narrowest readable bar. *3 60 mm when the narrowest bar is less than 0.19 mm. *4 Use a stable power supply of 5 VDC ±5 % .
''