Descrizione

Controller, PNP Type
Model LJ-V7001P
Number of connectable sensors Max. 2 units
Display Minimum displayable unit 0.1 µm, 0.00001 mm2, 0.01°
Maximum display range ±9999,99mm, ±9999,99mm2
Input terminal block Laser remote interlock input Non-voltage input*1
Input terminal block Encoder input NPN open-collector output, voltage output (5 V/12 V/24 V), and line-driver output all supported
Input terminal block Trigger input Voltage input*2
Timing 1,2 input
Auto-zero 1,2 input
Input terminal block Reset 1, 2 input
Input terminal block Start measurement/stop input
Start storage/stop input
Clear memory input
Laser OFF input
Programme switch input Voltage input x 4 inputs*2
Output terminal block Analogue voltage output ±10 V x 2 outputs, Output impedance: 100 ?
Output terminal block OUT comparator output PNP open collector output x 12 outputs*3 (Can freely assign 16 OUTs x 3 stage judgement results)
Strobe output PNP open collector output*3
Disable trigger output
Memory FULL output
Ready output
Output terminal block Error output PNP open collector output (N.C.)*3
PC interface Ethernet 1000BASE-T/100BASE-TX
USB USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)
RS232C Measurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s)
Rating Power voltage 24 VDC ±10 %, including Ripple (P-P)
Current consumption 1.3 A or less when connected to 1 head 1.9 A or less when connected to 2 heads
Environmental resistance Ambient temperature 0 to +50 °C
Relative humidity 20 to 85 % RH (No condensation)
Weight Approx. 1,500 g
*1 The rating for non-voltage input is up to 1 V for ON voltage and up to 0.6 mA for OFF current *2 The rating for voltage input is a maximum input voltage of 26.4 V, a minimum ON voltage of 10.8 V, and up to 0.6 mA for OFF current *3 The rating for PNP open-collector output is up to 50 mA (30 V or less), residual voltage of up to 1 V
''