Sensor Keyence FS-N14CP

Categoria - Keyence sensors

La nostra società non opera come distributore autorizzato, produttore o intermediario dei marchi registrati. Tutti i marchi registrati riportati e i numeri di parti sono proprietà esclusiva dei rispettivi proprietari.

Presso la compagnia Famaga potete comprare Sensor Keyence FS-N14CP, nonché altre parti di ricambio della compagnia Keyence con consegna in tutto il mondo, compresa la vostra città Dublin. Per domandare dei prezzi, dei tempi di consegna e di altre caratteristiche dei prodotti Keyence, vi preghiamo di feedback o d’inviare una descrizione di quello che vi è necessario all’indirizzo di posta elettronica sales@famaga.us

Descrizione

Fibre Amplifier, M8 Connector Type, Expansion Unit, PNP

Model	FS-N14CP
Type	High functionality 2 output M8 connector*1
Output	PNP
Main unit/Expansion unit	Expansion unit
Control output	2 PNP open collector 24 V, 1 output max: 100 mA or less, 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections), residual voltage 1 V or less
External input	-
Response time	50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Multiple connections to Expansion units	Up to 16 units can be connected total (two output type is treated as two units)
Light source	Red, 4-element LED
APC	ON/OFF switchable (Factory setting: OFF)
Number of interference prevention units	0 for HIGH SPEED, 4 for FINE, 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current Consumption	Normal: 1050 mW or less (42 mA max. at 24 V, 56 mA max. at 12 V)2 Eco on mode: 950 mW or less (38 mA max. at 24 V, 47 mA max. at 12 V)2 Eco Full mode: 600 mW or less (24 mA max. at 24 V, 29 mA max. at 12 V)
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
Ambient temperature	-20 to +55 °C (No freezing)*3
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Both main unit and expansion unit housing material: Polycarbonate
Weight	Approx. 22 g
1 Use a cable length of 30 m or less for M8 connector types. 2 Increases 100 mW (4.0 mA) for High Speed mode *3 One or two more units connected: -20 to +55 °C, 3 to 10 more units connected: -20 to +50 °C, 11 to 16 more units connected: -20 to +45 °C. When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.