L’ufficio principale
in Europa
sales@famaga.it
Indirizzo mail per le richieste
Italia
+39 02 897 44 138
-
Napoli+39 02 897 44 138
Lascia una richiesta
Garanzia
fino a 24 mesi
fino a 24 mesi
Prezzi
migliori
migliori
Risparmio
fino al 15-55%
fino al 15-55%
Consegna
in tutto il mondo
in tutto il mondo
Spedizioni
assicuraterate
assicuraterate
Consegna
gratuita
gratuita
Presso la compagnia Famaga potete comprare Sensor Keyence FS-N41C, nonché altre parti di ricambio della compagnia Keyence con consegna in tutto il mondo, compresa la vostra città Dublin. Per domandare dei prezzi, dei tempi di consegna e di altre caratteristiche dei prodotti Keyence, vi preghiamo di compilare il modulo di feedback o d’inviare una descrizione di quello che vi è necessario all’indirizzo di posta elettronica sales@famaga.us
Descrizione
Fibre Amplifier, M8 Connector Type, Main UnitModel | FS-N41C*1 | |
Type | M8 Connector*2 | |
Main unit/expansion unit | Main unit | |
Number of control outputs | 2*3 | |
Number of external inputs | 1*3 | |
Light source LED | Transmitter side: Red, four-element LED (wavelength 660 nm) | |
Response time | 23 µs (S-HSPD*4)/50 µs (HSPD*5) / 250 µs (FINE) / 500 µs (TURBO) / 1 ms (SUPER) / 4 ms (ULTRA) / 16 ms (MEGA) / 64 ms (TERA) | |
Control output | Open-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) / 20 mA or less (when used as an expansion unit) Residual voltage NPN 1.4 V or less (output current 10 mA or less) / 2 V or less (output current 10 to 100 mA) PNP 1.6 V or less (output current 10 mA or less) / 2.2 V or less (output current 10 to 100 mA) | |
External input | Input time 2 ms (ON) / 20 ms (OFF) or longer*6 | |
Protection circuit | Protection against reverse power connection, output overcurrent, output surge, and reverse output connection | |
Mutual interference prevention | S-HSPD/HSPD 0 units, FINE 4 units, TURBO/SUPER/ULTRA/MEGA/TERA 8 units (The mutual interference prevention values are twice those shown here when Double is set.) | |
Power supply | Power voltage | 10 to 30 VDC (including 10% ripple (P-P) or less) , class 2 or LPS*7 |
Current consumption | During normal operation: 910 mW or less (36 mA or less at 24 V/65 mA or less at 12 V) ECO ON: 840 mW or less (33 mA or less at 24 V/60 mA or less at 12 V) ECO FULL: 750 mW or less (30 mA or less at 24 V/52 mA or less at 12 V)*8 | |
Environmental resistance | Ambient light | Incandescent lamp: 20,000 lux or less, sunlight: 30,000 lux or less |
Operating ambient temperature | -20 °C to +55 °C (no freezing)*9 | |
Vibration resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each for X, Y, and Z axes | |
Shock resistance | 500 m/s2 , 3 times each for X, Y, and Z axes | |
Case material | Main unit and cover: polycarbonate | |
Weight | Approx. 25 g | |
*1 IO-Link Specification V.1.1/COM2 (38.4 kbps) is supported. *2 Ensure the cable length is 30 m or less for the M8 connector type. Ensure the cable length is 20 meters or less when connecting by way of IO-Link. *3 Output 2 and the external input are selectable. *4 Restrictions when S-HSPD is selected Output 2 of dual output types is fixed to OFF. IO-Link communication cannot be used. Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode. Output timer, Limit Detection, and Display Gain cannot be used. FULL cannot be selected for the ECO function. *5 Restrictions when HSPD is selected Display Gain cannot be used. *6 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected. *7 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher. *8 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max. *9 When expanded by 1 to 2 units: -20 °C to +55 °C. When expanded by 3 to 10 units: -20 °C to +50 °C. When expanded by 11 to 16 units: -20 °C to +45 °C. When using 2 outputs, 1 unit is counted as 2 units. The prescribed values for the ambient temperature assume that the sensor amplifier has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space. |
Eseguiamo la fornitura
in base alla vostra richiesta
Il presente servizio garantisce la massima comodità del cliente. Caricate semplicemente la lista delle attrezzature delle quali avete bisogno.
Invio in corso...
La lettera non è stata inviata
La richiesta è stata inviata
Vai in cima alla pagina
Produttore
Keyence